Archive for bodyarmor

HRPSports – It’s not Bob Hannah

I saw a little announcement at Motocross Action Magazine titled HRPSports is Accepting Resumes. HRP. The lightning bolt. Immediately I recalled hearing Bob Hannah say during some interview that his wife Terri was running HRP again. I also thought about the Jimmy Weinert Training Facility and the Jimmy Weinert Racing team that’s competing in both AMA Supercross and the American MX Nationals this year. I bet I’m not alone in thinking, “Is Hannah getting back into the sport in some way?” Read More…

Alpinestars Integrated Protective Gear

Alpinestars Bionic 2 Protector BNS Jacket frontRecently I had a brief email exchange with Ken Smith, editor of Australia-based VMX Magazine regarding the problems neck brace wearers have integrating other forms of protective gear. As Ken pointed out, everything from the bottom profile of your helmet to the shape of your chest protector/body armor can affect the way the neck brace works. Or doesn’t work.

Alpinestars Bionic 2 Jacket rear viewMany of us who have opted to wear a neck device have had to hack up our body armor or settle for a skimpy chest protector. That’s a choice I don’t want to have to make. This morning I was browsing the magazine rack at the local Barnes & Noble store and just happened to pickup the 10APR2010 issue of UK-based MotoX magazine. While thumbing through the pages I saw a blurb about some new AlpineStars body armor designed specifically to integrate with the AlpineStars Bionic Neck Support (BNS) and other neck devices. Read More…

helmet head – the Arai difference

arai-xd3motardsilI’ve just returned from my pilgrimage to Indianapolis and the annual Powersports Dealer Expo. There was a lot going on there this year, despite the economy. The biggest news was the Consumer Product Safety Improvement Act of 2008, a law that went into effect last week and summarily killed about 20% of the motorcycle industry in one fell swoop. But I’ll talk about that later.

This post is about helmets and what I learned at the show. The older I get the more interested I am in survival and safety technology. With the recent death of FMX star Jeremy Lusk from a head injury, helmets were high on my list this year. So I made it a point to spend time at the booths of as many major helmet manufacturers as I could — Bell, Shoei, Arai, HJC, and AGV.

These were just a few of the helmets on display. Every major vendor of apparel had at least one rack of helmets, and there were even a few new brands I never heard of before. Mike Metzger, the “godfather” of FMX, was at the show pushing his new line of Kali helmets and apparel.

Here’s a basic rule of thumb — style, color, and trendy design are not the most important consideration when looking for a helmet. Neither is ventilation or how many visor/shield configurations you offer. In my mind, neither is the margin offered to the dealer. But those seemed to be the only things anyone wanted to talk about. Except for Arai.

When I stepped into the Arai booth I was greeted with a wall covered in raw shell castings, cut-away shells, cut-away helmets showing various EPS liner configurations, and a bevy of crash-damaged helmets. I asked the first person I saw to tell me about Arai helmets and what made them different. (This was the first question I asked in every booth.) Immediately the salesman walked me over to the wall and began pointing out the raw fiberglass shell and talking about how helmet technology has evolved.

The salesman was an older gentleman, and in the course of his conversation he mentioned that his son had worked for Arai for 23 years. He took the older, single-layer fiberglass helmet casting (typical of 1980s-era helmets,) placed it on its side on the floor, and stood on it bouncing up and down. Then he explained, using photos and graphics on the wall, the 27–step process Arai uses to hand mold every modern, multi-layer Arai shell and explained the function of the various materials

He showed me the unique, dual-density, one-piece EPS liner that all Arai helmets use. He showed me the emergency cheek pad removal system. Then he began showing me the crash-tested helmets on display.

He noted that every rider had walked away without significant head injury. Some of the helmets were not just damaged, but destroyed. That the rider had survived was astonishing. But the helmet did its job.

After his demonstration I walked over to the shelf of new helmets and found a new XD3 Supermoto/Adventure helmet. I love this helmet — the look, the feel, the fit, the balance. Even though it is noticeably heavier in your hand than a Bell Moto8 or the more-comparable Shoei Hornet-DS, it doesn’t feel heavier on your head. There’s no top-heaviness at all.

As soon as I put the helmet down another salesman walked over and began asking me questions. He also started explaining the differences in Arai construction and pointing out features and considerations that the first gentleman had not gotten to.

In fact, everyone in the Arai booth appeared to be extremely knowledgeable about their product. Moreso than any other helmet vendor I visited. I had a similar, but not quite as thorough, experience last year when I talked with the marketing director at Bell. But everyone else, not so much. They pretty much wanted to show me the new graphics, the new vents, or talk about the margins I make as a dealer. I know that’s important, but it’s not what I asked about.

The AGV rep did talk briefly about the industry-wide discussion over whether Snell is the right standard, and whether Arai helmets are, in fact, too stiff. He mentioned that there was actually a Snell meeting at the show to discuss some of these issues. The AGV helmets are noticeably less stiff than an Arai.

There is a legitimate argument about how to rate and construct helmets, and there is real concern that Snell may not be the right standard. There is significant industry debate over this issue, with competing standards in the US, Europe, and the UK. I wrote about this last year.

In that article I noted that, in an informal survey of several riders, there was general agreement that a $250 helmet was probably 2x better than a $100 helmet, but there was doubt that a $500 helmet was actually 2x better still.

I still don’t know the answer, but I do know this — the Arai folks are fanatical about helmets, and it’s very hard to argue against a company that is so committed to protecting your head. They are not making a fashion statement. They are not bowing to trends and fads if it compromises what they believe a helmet should be. They are 100% dedicated to making the very best helmet they know how to make. And this passion shows in everyone in the company.

I might still say the Bell Moto8 is my favorite off-road helmet, but I’m not sure. I know I love the Arai XD3 and will replace my current street helmet as soon as I can.

My new Leatt brace arrived today

leatt-braceMy new Leatt brace arrived today. Ordered it from BTO Sports. I also ordered an EVS Revolution 5 body armor which is designed to fit around the Leatt.

Last Friday I got my new Organic air-cushion body armor from RXR Protect North America. RXR got me setup with one to test with the Leatt. The plan is to try the Leatt with both pieces of body armor and see which works best and what I think about each, and then do a little report for the VMX community. We old guys have to watch our bones. Once you get past 40 your bones start to get brittle, even if you have good bone density. Get-offs that you would have walked away from at 35 will put you in a hospital at 45. And that’s no fun. So safety and protection are the name of the game for the happy VMX racer.

Got my RXR Protect body armor today

rxrlogoGot my RXR Protect Organic chest protector today. Thanks to Chris Favro of RXR Protect North America for fixing me up with a sweet deal so I can test this with the new Leatt Brace. After talking with Chris we determined that the best path forward was to just get one and see how it worked. The RXR is not designed specifically for the Leatt, and some riders have liked it, others not. I promised Chris I’d test them together and share my findings with the VMX community via this website and McCookRacing.com. Unfortunately, it looks like that’s going to be a little ways down the road, as work and travel are making it almost impossible to get any saddle time and it will be hectic until the Holidays. But hopefully I can get in a little riding before then.

rxr_organic_white_front